![ComeUp 16.5rsi ComeUp 16.5rsi](graphics/en-US/cssui/blank.gif)
ComeUp is a family ownded business that has exclusively been manufacturing winches for over 47 years. The current design of all competing winches locate the brake inside the drum spool. With an internal brake, synthetic rope on the spool acts as an insulator and keeps heat dissapating and causes brake fade, slipping and failure. The ComeUp winch has a cone brake system outside the drum where it can dissipate the heat and stay firmly engaged. The CBS system is also an adjustable true friction brake and provides the most brake surface area of any winch on the market. Many of the inexpensive units on the market do not even have a friction brake but use a coil spring in a bind up arrangement that is very prone to failure. The COMEUP Seal 16.5rsi Trail Editionis a high quality winch used all over the world.
- 16,500 lb. single-line pulling capacity
- Integrated control box makes installation a breeze
- Innovative BOSS hook nests onto the fairlead for tidy storage
- Includes 17' remote control as well as wireless pendant control
- 82 feet of 1/2" rope on the spool
- Warranty Limited lifetime warranty for mechanical components, three (3) year warranty for electrical components
Lighting is a critical part of your bumper. There are considerations of snow and fog conditions, high speed driving, city vs. off-road, search and exploration, light source – halogen, HID, LED, and budget. BUCKSTOP offers a variety of solutions for all lighting needs. The STANDARD configuration is one pair of built-in 6" round lights. The information below shows additional light-mount options available on most BUCKSTOP bumpers.
![Standard Lighting Standard Lighting](/mm5/themes/shadows/images/JF008_l-1-180x180.jpg)
Standard Lighting
EVERY BUMPER COMES READY FOR A PAIR OF 6" ROUND LIGHTS
Note: The bumper comes with universal mounts for single post bottom mount lights. Factory lights will NOT mount directly into the bumper. In most cases the factory wiring harness and dashboard switch can be used to run aftermarket lights.
![BUILT-IN RECESSED LIGHT BUCKETS BUILT-IN RECESSED LIGHT BUCKETS](/mm5/themes/shadows/images/Red_shade1_l1-180x180.jpg)
ADDITIONAL LIGHTING - $125
BUILT-IN RECESSED LIGHT BUCKETS – Add one more pair of 6" or 4" lights
![DUAL RIGID LED LIGHTS DUAL RIGID LED LIGHTS](/mm5/themes/shadows/images/DSC_0037-2_l-180x180.jpg)
DUAL RIGID LED LIGHTS - $125
Recessed Mounting for two pair of Rigid "E" Series 4" Light Bars. Requires "U" Cradle Mount. No charge!
![GRILL GUARD MOUNTING GRILL GUARD MOUNTING](/mm5/themes/shadows/images/Light-Bar-x016_l-180x180.jpg)
GRILL GUARD MOUNTING - $125
Cross bar for Baja Style Grill Guards – Add 2, 3 or 4 lights.
![BOLT ON LIGHT BAR BOLT ON LIGHT BAR](/mm5/themes/shadows/images/Marty3_tight_l-180x180.jpg)
BOLT ON LIGHT BAR - $110
Attaches to top of bumper. Add 2, 3 or 4 lights.
![TOP MOUNTING - No Charge TOP MOUNTING - No Charge](/mm5/themes/shadows/images/dodge03_bluefront_l-180x180.jpg)
TOP MOUNTING - No Charge
Drill your own holes to mount your own lights. Note: Drilling and mounting performed by customer
![NO LIGHTS - No Charge NO LIGHTS - No Charge](/mm5/themes/shadows/images/F17-Classic-1-1200x900-180x180.jpg)
NO LIGHTS - No Charge
Eliminate light openings entirely to have a solid wing face.
Choice of Three Materials
Buckstop Bumpers are built to be used and abused. The bumper is fully intended to protect the vehicle through an optimal balance of strength and weight. Buckstop Truckware is a full engineering and manufacturing facility with all operations in-house. Custom designs are available as well as special materials. Buckstop works in standard carbon steel, aluminum, and stainless steel.
CARBON STEEL
The main-stay of Buckstop's heavy-duty, high strength top quality Bumpers
Carbon is the basic steel from which most things including most bumpers are made. It is very difficult to dent in animal strikes and resilient in other collisions. Buckstop bumpers for full sized rigs are 1/4″ steel in the primary impact zone and winch center and 3/16″ steel under the headlights. Half ton full size vehicles are 3/16" throughout.
- The advantages of Carbon Steel are low cost and its ability to absorb impact.
- A typical 3/4 ton full-sized bumper with grill guard weighs approximately 220lbs.
ALUMINUM
Light-weight aluminum engineered to maintain Buckstop's tradition of brute strength
Aluminum is a favorite choice in cases where weight is critical. To maintain Buckstop's standard of strength, the aluminum bumpers are 3/8" thick in the primary impact zone and winch center and 1/4″ steel under the headlights. The geometry and gusseting is enhanced as well. The aluminum bumpers use steel mounting to the frame and steel Grill Guard tubing where the bumper is especially vulnerable. In addition, the 2" trailer receiver is a steel bolt-on configuration. It could easily be made lighter, thinner, and without so many features, but it comes at the cost of strength.
- The advantage of aluminum is a weight savings of 90lbs over steel and a resistance to corrosion.
- Finish – the aluminum bumpers are powdercoated just like steel.
- A typical 3/4 ton full-sized bumper with grill guard weighs approximately 130lbs.
STAINLESS STEEL
Maximum strength. Maximum corrosion resistance.
Stainless steel is a higher strength material than regular steel that will essentially never rust.
- The advantage of stainless steel is excellent resistance to corrosion.
- Finish – the stainless steel bumpers are powdercoated just like steel.
- A typical 3/4 ton full-sized bumper with grill guard weighs approximately 220lbs.
WINCH SELECTION – Buckstop bumpers are built for most 4-1/2″ x 10″ bolt pattern winches. There is ample access to the winch controls and cable through the 28″” access opening on top of the bumper. Winches can be mounted foot down or foot forward. Buckstop offers a selection of WARN winches matched to an assortment of needs encountered by our customers. When selecting a winch, consider how often you will use it and the demands of the situation (long pulls, difficult terrain, etc). Two “”sport”” winches are offered including the popular air-compressor winch combo and the light-weight Zeon series.
These winches will NOT work: Warn VR EVO, Ramsey RE Series worm drive, Superwinch, and all Megawinch.
Powder Coat colors include full sandblast, phosphate wash, two-coat – primer and top coat – baked on industrial powder coating. STANDARD COLORS: STEEL GREY and BLACK – Standard.
BLACK – Hammertone (Standard choice)
Large texture, slippery finish, easy to clean. Mini-tex – fine texture, matte finish